Lab Status: Difference between revisions
Jump to navigation
Jump to search
Content added Content deleted
No edit summary |
|||
Line 2:
<span style="color: rgb(200, 0, 0);"><u>'''There are two important power buttons''' </u></span>
;'''There are times that the MEG rack needs to be rebooted.'''
To restart (reboot) the rack:
▲There are times that the MEG rack needs to be rebooted. If the ACQ starts with some noisy channels, usuall restarting the ACQ will make
▲the noise go away. But if the HLU does not work, you must reboot the entire rack.
▲* First you must power off the rack. Press the button on the console with the ring of light around it. The light changes color.
▲* Next you must power off the HLU box which is located on top of the new rack. The HLU box has a button with a light in it. Press it to turn off the HLU.
▲* Return to the console and power the rack back on.
▲* Wait about 10 seconds.
▲* Next turn the HLU box back on.
▲* Now you can launch Acq.
|
Revision as of 13:28, 9 March 2018
Procedure for restarting the rack
There are two important power buttons
- The button on the console with the ring of light controls the power to the rack. This light changes colors when the rack is powered up.
- The HLU has a button with a light within it. Press this button to turn on and off the HLU unit
- There are times that the MEG rack needs to be rebooted.
- If the Acq starts with some noisy channels, usually restarting the Acq will make the noise go away.
- If the HLU does not work, you must reboot the entire rack.
To restart (reboot) the rack:
- First you power off the rack. Press the button on the console.
- Next you must power off the HLU box which is located on top of the new rack. Press it to turn off the HLU.
- Return to the console and power the rack back on.
- Wait about 10 seconds.
- Next, turn the HLU box back on.
- Now you can launch Acq.