Lab Status: Difference between revisions
Jump to navigation
Jump to search
Content added Content deleted
mNo edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
This is a recent snapshot of the lab (NIH access only): |
|||
=Procedure for restarting the rack = |
|||
%width=500px% http://kurage.nimh.nih.gov/nih/megcam.jpg |
|||
<span style="color: rgb(200, 0, 0);"><u>'''There are two important power buttons''' </u></span> |
|||
: The button on the console with the ring of light controls the power to the rack. This light changes colors when the rack is powered up. |
|||
: The HLU has a button with a light within it. Press this button to turn on and off the HLU unit |
|||
Image updated every 5 minutes. |
|||
'''There are times that the MEG rack needs to be rebooted.''' |
|||
* If the Acq starts with some noisy channels, usually restarting the Acq will make the noise go away. |
|||
* If the HLU does not work, you must reboot the entire rack. |
|||
The live cam is %newwin%[[http://156.40.187.173/main.htm | here]]. |
|||
To restart (reboot) the rack: |
|||
The main MEG lab phone number is (301)402-7847. |
|||
# First you power off the rack. Press the button on the console. |
|||
# Next you must power off the HLU box which is located on top of the new rack. Press it to turn off the HLU. |
|||
# Return to the console and power the rack back on. |
|||
# Wait about 10 seconds. |
|||
# Next, turn the HLU box back on. |
|||
# Now you can launch Acq. |
|||
Revision as of 11:12, 14 March 2018
This is a recent snapshot of the lab (NIH access only):
%width=500px% 
Image updated every 5 minutes.
The live cam is %newwin%[| here].
The main MEG lab phone number is (301)402-7847.